Schichtdickenmessgerät mit integriertem Sensor
Nº de art. 3791
byko-test Lite
Schichtdickenmessgerät
- Kompaktes, einfach zu verwendendes Messgerät für die Schichtdicke auf Fe- und NFe-Substraten
- Hohe Funktionalität einschließlich Statistik und Speicher für die Datenübertragung
Features
The byko-test film thickness gage includes dew point measurement, whereas the byko-test Lite is for dry-film thickness measurement only.
- Diseño compacto para operación con una sola mano
- Pantalla a color con pantalla abatible de 90° y 180°
- Reconocimiento automático de sustrato
- Punta de sonda de rubí fuerte y resistente al desgaste
- Calibración de punto cero
- Bloqueo de teclas solo para tomar lecturas
- Modo estadístico con memoria de 1000 medidas
- Modo de medición continua
- El modo de estabilidad advierte al usuario cuando el instrumento está inclinado evitando lecturas incorrectas
Technical Attributes
-
- Measuring Range Mils / µm
- 0 - 79 mil 0 - 2,000 µm
-
- Measurement Method
- Film Thickness Fe/NFe
-
- Full Scale Calibration Range Mils/ µm
- -
-
- Certificate
- no
-
- Substrate Fe
- Steel or Iron
-
- Substrate NFe
- Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel
-
- Measuring Range
- 0 - 2000 µm
-
- Measuring Range
- 0 - 79 mil
-
- Accuracy
-
±2 µm + 3% of measured value
±0,08 mil + 3% of measured value
-
- Minimum Curvature
- Convex 5 mm; Concave 30 mm
-
- Minimum Curvature
- Convex 0.20 in; Concave 1.2 in
-
- Minimum substrate thickness
- Fe: 0,5 mm; NFe: 0,05 mm
-
- Minimum substrate thickness
- Fe: 0,019 in; NFe: 0,002 in
-
- Memory
- 1000 lecturas
-
- Weight
- 0.16 kg
-
- Weight
- 0.35 lb
-
- Dimensions: L x W x H
- 11.5 x 6.7 x 4.4 cm
-
- Dimensions: L x W x H
- 4.53 x 2.65 x 1.75 in
Technical Specifications
Thickness Measurement
General
Standards
Delivery Content
Instrumento
Placa de cero Fe & NFe
Cuñas de calibración (1)
2 pilas AA
Manual de instrucciones
Maletín
Placa de cero Fe & NFe
Cuñas de calibración (1)
2 pilas AA
Manual de instrucciones
Maletín
Downloads
Folleto del producto
Instrucciones de seguridad
Instrucciones resumidas
Conocimiento
Film thickness
For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.
Read moreAccessories
Other ALTANA divisions
A member of
