Wet Film Thickness Gauges with wheels (microns)
Artikel-Nr. 6551
Inmont Gage S, 0-40 µm
Wet Film Thickness Gauge with wheels - original design
- Full Scale Calibration Range: 0 - 40 µm
- Recommended: 8 - 32 µm
- Resolution: 2 µm
- Original Interchemical design for general use
- Scale is stamped on the outside of the metal wheel; no rotating scale is used
Features
Das Nassfilm-Doppelrad ist auch als IC-Gerät oder Inmont Gerät bekannt. Es ist ideal geeignet zur Messung dünner Schichten z.B. beim Druckprozess.
- Hohe Genauigkeit auch bei dünnen Filmen
- Auch beim laufenden Prozess einsetzbar
- Einfache Reinigung
- Korrosionsbeständiger Edelstahl
- Halter optional
- Mil oder metrische Version
- Übereinstimmend mit ASTM D1212 und ISO 2808
Technical Attributes
-
- Scale
- Metrisch
-
- Full Scale Calibration Range
- 0 - 40 µm
-
- Recommended
- 8 - 32 µm
-
- Auflösung
- 2 µm
-
- Weight
- 0.2 kg
-
- Weight
- 0.5 lb
-
- Dimensions
- ∅ 5 x 2.5 cm
-
- Dimensions
- ∅ 2 x 1 in
Thickness Measurement
General
Standards
Procedure
The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.
Downloads
Produktbroschüre
Accessories
Other Variations
Other ALTANA divisions
A member of
