Grind Gages - µm or mils with extra deep grooves, 2 paths

Artikel-Nr. 2513

Grind Gage No. PB-20
Grind gage - groove depth range 0-20 mils

Path Size: 0.5 x 8 in
No. of Paths: 2
Scales: Mils
Range: 0 - 20

Weitere Optionen

Scales

Zertifikat:

Click here for the Chinese price list in RMB

exkl. Steuern & Versand

Features

The Fineness of Grind Gage is a flat steel block in the surface of which are two flat-bottomed grooves varying uniformly in depth from a maximum at one end of the block to zero near the other end. Groove depth is graduated on the block according to the scales used for measuring particle size. The grind gages with extra deep groove are available either with "Microns - scale" or "Mils - scale".

Grind blocks made of high quality, corrosion resistant stainless steel for extended use
Dual channel designs
Groove depth is graduated on the block showing either microns or mils scales

Technische Eigenschaften

Technical Specifications

Path Size

0.5 x 8 in
Scales

mil
No. of Paths

2
Range

0 - 20 mil

General

Weight

3 kg
Weight

6.5 lb
Dimensions: L x W x H

9.5 x 2.5 x 0.75 in

Normen

ISO

1524

ASTM

D333 D1210 D1316 D6846

Verfahren

Place a slight excess of sample in the deep end of the groove and, with the straight-edge scraper provided, draw the sample toward the shallow end of the groove. Ratings are in terms of the point on the scale where the oversize particles, or traces made by them, first appear in substantial concentration.

Care of Grind Gages: Clean the gage after each use. Use a solvent and a soft cloth. Keep the gage covered or encased at all times when not in use. Protect gages that lie idle for extended periods of time from rust with an oil coating or an oil soaked wrap.

Lieferumfang

Grind block
Scraper (2514)
Storage case

Downloads

Produktbroschüre