Brillómetro de un ángulo

Technical Specifications

• Geometry

  75°

• Measurement Area / Performance

  large area

• Application

  papel, láminas vinilo

• Measuring Area

  7 x 24 mm

• Measuring Area

  0.3 x 0.95 in

Gloss Measurement

• Measuring Range

  0 - 180 GU

• Repeatability

  0 - 100 GU:  ± 0.2 GU

  100 - 2000 GU:  ± 0.2 %

• Reproducibility

  0 - 100 GU:  ± 0.5 GU

  100 - 2000 GU:  ± 0.5 %

• Spectral sensitivity

  Observador de patrón CIE para iluminante CIE-C

General

• Measuring time

  0.5 segundos / geometria

• Memory

  999 lecturas con fecha y hora

• Interface

  USB

• Idiomas

  English French German Italian Spanish

• Power supply

  Pila alcalina 1.5V AA 4000 lecturas o via USB

• Battery Capacity

  4.000 lecturas

• Weight

  0.4 kg

• Weight

  0.9 lb

• Operating temperature

  15 - 40 °C

• Operating temperature

  60 - 104 °F

• Relative humidity

  hasta 85 %, sin condensación

• Dimensions: L x W x H

  15.5 x 4.8 x 7.3 cm

• Dimensions: L x W x H

  6.1 x 1.9 x 2.9 in

Gloss Measurement

Gloss measurement is an important factor in quality control to guarantee a consistent and uniform gloss of any product. The visual perception is depending on the observer, illumination and viewing conditions as well as on material and product properties. In order to measure gloss objectively instrumental measurement is performed with a gloss meter. Dependent on the gloss level and the application different geometries and functions are needed. The following article reviews visual perception of gloss, measurement principle of a gloss meter, when to use which measurement geometry and gives practical hints for special applications and how to deal with limitations. 

Guide for Reliable Gloss Data

Uniform and consistent gloss are an essential quality criterion for a variety of products. Therefore, gloss needs to be objectively measured. Only what can be objectively measured, can be controlled and can be optimized which is of importance in product development as well as in production control. Especially in case of multi-component products a uniform gloss is an expression of “high quality”. Variations in gloss look like something is wrong and the end-user will perceive it as a defect. Therefore, gloss limits and tolerances are defined based on application and customer expectations.