Spessimetri con sonda fissa
Nº de art. 3791
byko-test Lite
Spessimetro per film asciutti - modello base
- Spessimetro compatto e facile da usare per substrati Fe e NFe
- Grande funzionalità incluse le statistiche e la memoria per il trasferimento dei dati
Features
Le jauge d'épaisseur de fim byko-test inclue aussi la mesure du point de rosée alors que la byko-test Lite ne mesure que l'épaisseur de film sec.
- Design compact pour une utilisation à une main
- Ecran couleur avec écran pivotant à 90° et 180°
- Reconnaissance automatique du substrat
- Très haute résistance de la pointe de sonde rubis
Calibrage du point zéro
- Blocage des boutons possible pour prendre que des mesures
- Mode statistique avec mémoire de 1000 mesures
- Mode de mesure continu
- Le mode stabilité avertit l’utilisateur lorsque l’instrument n’est pas stable prévenant de mauvaises mesures
Technical Attributes
-
- Measuring Range Mils / µm
- 0 - 79 mil 0 - 2,000 µm
-
- Measurement Method
- Film Thickness Fe/NFe
-
- Full Scale Calibration Range Mils/ µm
- -
-
- Certificate
- no
-
- Substrate Fe
- Steel or Iron
-
- Substrate NFe
- Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel
-
- Measuring Range
- 0 - 2000 µm
-
- Measuring Range
- 0 - 79 mil
-
- Accuracy
-
±2 µm + 3% of measured value
±0,08 mil + 3% of measured value
-
- Minimum Curvature
- Convex 5 mm; Concave 30 mm
-
- Minimum Curvature
- Convex 0.20 in; Concave 1.2 in
-
- Minimum substrate thickness
- Fe: 0,5 mm; NFe: 0,05 mm
-
- Minimum substrate thickness
- Fe: 0,019 in; NFe: 0,002 in
-
- Memory
- 1000 readings
-
- Weight
- 0.16 kg
-
- Weight
- 0.35 lb
-
- Dimensions: L x W x H
- 11.5 x 6.7 x 4.4 cm
-
- Dimensions: L x W x H
- 4.53 x 2.65 x 1.75 in
Technical Specifications
Thickness Measurement
General
Standards
Delivery Content
Instrument
Plaques Zéro (Fe & NFe)
Cale d'épaisseur (1)
2 Piles AA
Manuel
Mallette
Plaques Zéro (Fe & NFe)
Cale d'épaisseur (1)
2 Piles AA
Manuel
Mallette
Downloads
Folleto del producto
Instrucciones de seguridad
Instrucciones resumidas
Conocimiento
Film thickness
For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.
Read moreAccessories
Other ALTANA divisions
A member of
