Dry film thickness gauge with fixed sensor

Article No. 3790

byko-test Fe/NFe
Dry film thickness gauge plus humidity & dew point check

4 measurements in one instrument: Film thickness Fe/NFe, Air temperature, Relative humidity, Dew point
SSPC specific mode for standardized measurement protocols and calibration routines

More options

Measurement Method

Certificate

Click here for the Chinese price list in RMB

excl. taxes & shipping cost

Features

The byko-test film thickness gage includes dew point measurement, whereas the byko-test Lite is for dry-film thickness measurement only.

Compact design for one hand operation
Color display with 90° and 180° flip screen
Automatic substrate recognition
Strong wear resistant ruby probe tip
Zero, single and two point calibrations
Key lock for only taking readings
Hi/Low tolerance settings for pass/fail warning
Statistics mode with 1000 measurement memory
Continous measurement mode
Stability mode warns user when instrument is tilted preventing wrong readings

Technical Attributes

Technical Specifications

Measuring Range Mils / µm

0 - 79 mil 0 - 2,000 µm
Measurement Method

Film Thickness Fe/NFe - Dew Point
Full Scale Calibration Range Mils/ µm

-
Certificate

yes

Thickness Measurement

Substrate Fe

Steel or Iron
Substrate NFe

Non-magnetic metals: aluminum, copper, brass, zinc, stainless steel
Measuring Range

0 - 2000 µm
Measuring Range

0 - 79 mil
Accuracy

±2 µm + 3% of measured value

±0,08 mil + 3% of measured value
Minimum Curvature

Convex 5 mm; Concave 30 mm
Minimum Curvature

Convex 0.20 in; Concave 1.2 in
Minimum substrate thickness

Fe: 0,5 mm; NFe: 0,05 mm
Minimum substrate thickness

Fe: 0,019 in; NFe: 0,002 in
Temperature Measuring Range

0 - 50 °C
Temperature Measuring Range

32 - 122 °F
Temperature Accuracy

±1.5 °C; ±2.7 °F
Humidity Measuring Range

0 - 100 % RH
Humidity Accuracy

20 - 70 %RH: ±4%

0-19 & 71-100 %RH: ±6%

General

Memory

1000 readings
Weight

0.16 kg
Weight

0.35 lb
Dimensions: L x W x H

11.5 x 6.7 x 4.4 cm
Dimensions: L x W x H

4.53 x 2.65 x 1.75 in

Standards

SSPC

SSPC PA2

Delivery Content

Instrument
Zero plates Fe & NFe (3800)
Calibration Shims (5)
Calibration Certificate
2 AA batteries
USB cable (3799)
Data transfer software (3798)
Manual
Carrying case

Downloads

Manuals

Safety Instructions

199025645-1912.pdf

Short Instructions

199025395_E_1902.pdf

Knowledge

Film thickness

For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.

Accessories