PosiTector 6000 Standard Coating Thickness Gauges

Article No. 5601

Positector 6000 F1
DFT Gauge w/ built-in Fe probe - cable probes as accessories

PosiTector Standard Gauge
For measurement on ferrous substrates
Built-in probe
0 - 60 mils (0 - 1500 µm)

Select your model

Click here for the Chinese price list in RMB

excl. taxes & shipping cost

Features

The Defelsko PosiTector 6000 Standard Gauge is a Dry Film Coating Thickness Gage, they are ready to measure, with no calibration adjustment required for most applications.
Storage of 1,000 readings per probe - stored readings can be viewed or downloaded
Fast measurement speed, 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection.
Ready to measure - no adjustment required for most applications
2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
On-gage helpexplains menu items at the touch of a button
Flashing display, ideal in a noisy environment
RESET feature instantly restores factory settings
Weatherproof, dustproof, and water-resistant, IP65-rated enclosure
Ergonomic design with durable rubberized grip
Wear-resistant probe tip
Shock-absorbing, protective rubber holster for added impact resistance
Two year warranty on gage body AND probe
Certificate of Calibration showing traceability to NIST or PTB included
Built-in temperature compensation ensures measurement accuracy
Hi-RES mode increases displayed resolution for precision applications
Conforms to national and international standards including ISO and ASTM
Defelsko PosiTector body accepts all PosiTector 6000, 200, RTR, SPG, DPM, IRT, SST, UTG, SHD, BHI, and GLS probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, ultrasonic wall thickness gage, hardness tester, or gloss meter
Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors
Selectable display languages
Auto rotating display with Flip Lock
Extended cables available (up to 75 m/250 ft) for underwater or remote measuring
Mils/Microns/mm switchable
Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring
Screen Capture - save 100 screen images for record keeping and review
HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
Instant-on feature quickly powers up the gage if recently powered down
Up to 30% longer battery life
USB port for fast, simple connection to a PC and to supply continuous power. USB cable included.
Every stored measurement is date and time stamped
Software Updates and solutions for viewing, analyzing & reporting data

Technical Attributes

Technical Specifications

Measuring Range Mils / µm

0 - 60 mil 0 - 1,500 µm
Full Scale Calibration Range Mils/ µm

-

Thickness Measurement

Substrate

Ferrous
Probe

built-in
Measuring Range

0 - 1500 µm
Measuring Range

0 - 60 mil
Accuracy

0-2 mill: ±(0.05 mil +1 %) > 2 mill: ±(0.1 mil +1 %) 0-50 µm: ±(1 µm +1 %) > 50 µm: ±(2 µm +1 %)

Standards

ISO

2178 2360 2808

ASTM

B499 D1186 D1400 D7091 E376

Procedure

Remove the protective plastic cap (if supplied) from probe.
Power-up Gage by pressing the center navigation button.
Place the probe FLAT on the surface to be measured. HOLD STEADY. When a valid measurement is calculated, the Gage BEEPS twice and the measurement is displayed.
Lift probe AT LEAST 2 INCHES (5cm) from the surface between measurements - OR - leave probe on the surface in the same location for continuous measurements.
If memory is ON while continuous measurements are being taken, only the last value on the display (when the probe is lifted) is stored into memory.

Delivery Content

Standard gage
Probe F, built-in (5680)
Plastic shims
Wrist strap
3 AAA batteries
Certificate
Manual
Rubber holster with belt clip
Nylon carrying with shoulder strap

Accessories