PosiTector 6000 Standard Coating Thickness Gauges
Article No. 5647
Positector 6000 N90S1
- PosiTector Standard Gauge
- For measurement on non-ferrous substrates
- 90° Microprobe
- 0 - 25 mils (0 - 625 µm)
Features
- The Defelsko PosiTector 6000 Standard Gauge is a Dry Film Coating Thickness Gage, they are ready to measure, with no calibration adjustment required for most applications.
- Storage of 1,000 readings per probe - stored readings can be viewed or downloaded
- Fast measurement speed, 60+ readings per minute. Enhanced FAST mode - 90+ readings per minute for quick inspection.
- Ready to measure - no adjustment required for most applications
- 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation
- On-gage helpexplains menu items at the touch of a button
- Flashing display, ideal in a noisy environment
- RESET feature instantly restores factory settings
- Weatherproof, dustproof, and water-resistant, IP65-rated enclosure
- Ergonomic design with durable rubberized grip
- Wear-resistant probe tip
- Shock-absorbing, protective rubber holster for added impact resistance
- Two year warranty on gage body AND probe
- Certificate of Calibration showing traceability to NIST or PTB included
- Built-in temperature compensation ensures measurement accuracy
- Hi-RES mode increases displayed resolution for precision applications
- Conforms to national and international standards including ISO and ASTM
- Defelsko PosiTector body accepts all PosiTector 6000, 200, RTR, SPG, DPM, IRT, SST, UTG, SHD, BHI, and GLS probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, ultrasonic wall thickness gage, hardness tester, or gloss meter
- Multiple Calibration adjustment options including 1 point, 2 point, and ISO 19840 correction factors
- Selectable display languages
- Auto rotating display with Flip Lock
- Extended cables available (up to 75 m/250 ft) for underwater or remote measuring
- Mils/Microns/mm switchable
- Statistics mode continually displays/updates average, standard deviation, min/max and number of readings while measuring
- Screen Capture - save 100 screen images for record keeping and review
- HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
- Instant-on feature quickly powers up the gage if recently powered down
- Up to 30% longer battery life
- USB port for fast, simple connection to a PC and to supply continuous power. USB cable included.
- Every stored measurement is date and time stamped
- Software Updates and solutions for viewing, analyzing & reporting data
Technical Attributes
-
- Measuring Range Mils / µm
- 0 - 25 mil 0 - 625 µm
-
- Full Scale Calibration Range Mils/ µm
- -
-
- Substrate
- Non-Ferrous
-
- Probe
- separate
-
- Measuring Range
- 0 - 625 µm
-
- Measuring Range
- 0 - 25 mil
-
- Accuracy
- 0-4 mill: ±(0.01 mil +1 %) > 4 mill: ±(0.1 mil +3 %) 0-100 µm: ±(0.3 µm +1 %) > 100 µm: ±(2 µm +3 %)
Technical Specifications
Thickness Measurement
Standards
Procedure
- Remove the protective plastic cap (if supplied) from probe.
- Power-up Gage by pressing the center navigation button.
- Place the probe FLAT on the surface to be measured. HOLD STEADY. When a valid measurement is calculated, the Gage BEEPS twice and the measurement is displayed.
- Lift probe AT LEAST 2 INCHES (5cm) from the surface between measurements - OR - leave probe on the surface in the same location for continuous measurements.
- If memory is ON while continuous measurements are being taken, only the last value on the display (when the probe is lifted) is stored into memory.
Delivery Content
Standard gage
Probe N90S, 90°, micro-probe (5690)
Plastic shims
Wrist strap
3 AAA batteries
Certificate
Manual
Rubber holster with belt clip
Nylon carrying with shoulder strap
Probe N90S, 90°, micro-probe (5690)
Plastic shims
Wrist strap
3 AAA batteries
Certificate
Manual
Rubber holster with belt clip
Nylon carrying with shoulder strap
Accessories
Other Variations
Other ALTANA divisions
A member of
