Film Applicator, 1 Gap
Article No. 5551
Single Bar 2", 6 mils
Bird Type Applicator
- Gap Clearance: 12.0 mils (304.8µm)
- Theoretical wet film thickness: 6.0 mils (152.4µm)
- Film Width: 2 inches (5.08cm)
Certificate:
Features
The bar applicators are designed for easy cleaning and maintenance.
- Made of high quality stainless steel for long life
- Packaged in reusable storage box to prevent damage
Technical Attributes
-
- Gap Clearance
- 12 mil
-
- Gap Clearance
- 305 µm
-
- Film Width
- 2 in
-
- Film Width
- 5.1 cm
-
- Dimensions: L x W x H
- 8.9 x 2.5 x 1.5 cm
-
- Dimensions: L x W x H
- 3.5 x 1 x 0.6 in
Technical Properties
General
Standards
Procedure
- Place substrate to be coated on smooth surface
- Place film applicator on substrate
- Pour coating in front of gap in pulling direction
- Pull at uniform speed (approx. 25 mm/s)
- Put applicator immediately into diluted cleaning solvent and clean with brush
- After cleaning, thoroughly dry the applicator and store in a dry place, preferably its case
Accessories
Other Variations
Other ALTANA divisions
A member of
