Permeability Cups
Article No. 2300
Permeability Cup S
Vapor Transmission Analysis of Small Samples
- Exposed Area: 10 cm²
- Dimensions:6.3 x 2.5 cm (2.5 x 1 in)
Features
BYK-Gardner offers two sizes of cups to perform a permeability test.
- Small 10 square centimeter cup to allow for a smaller sample and less desiccant
- A rubber gasket is used to provide an excellent seal
- Knurled side edges to easily tighten or open the cup
Technical Attributes
-
- Exposed Area
- 10 cm²
-
- Weight
- 0.08 kg
-
- Weight
- 0.17 lb
-
- Dimensions: L x W x H
- 2.5 cm
-
- Dimensions: L x W x H
- 1 in
-
- Dimensions
- ∅ 6.3 x 2.5 cm
-
- Dimensions
- ∅ 2.5 x 1 in
Technical Specifications
General
Standards
Procedure
During a test, vapor passes from the cup through the film specimen to an open container of desiccant or other absorbent material in a controlled environment. The permeability cup and other container are sealed together in a larger container to provide control of the vapor pressure. Testing may also be set up to allow passage of vapor from a solution in the open container through the test film to a desiccant or other absorbent material within the permeability cup.
Delivery Content
Threaded flange
Cut bottom
Retaining washer
Neoprene gasket S (2305)
Polyethylene gasket S (2304)
Manual
Cut bottom
Retaining washer
Neoprene gasket S (2305)
Polyethylene gasket S (2304)
Manual
Downloads
Accessories
Other Variations
Other ALTANA divisions
A member of
