Transducer for Multi-Layer Film Thickness Measurement
Article No. 94021
BYK-PELT-Transducer M10, 300 µm - 5 mm
Low frequency transducer for rubberized or thick finishes
- Measurement range is 300 µm - 5 mm
- Transducer for maximal penetration into thicker coatings
Features
Transducers for a wide range of thickness and materials:
We have developed novel fabrication techniques to manufacture, bond and assemble very high frequency elements with an unsurpassed precision, reliability and long service life.
Latest transducer technology is used in Generation II (‘B’ suffix) offering higher sensitivity and resolving power than Generation I. The higher sensitivity enables improvements in the ability to discern lower contrasting layers and the higher resolving power facilitates gauging of thinner layers.
- Low frequency transducers for thick layers up to 5 mm
- Medium frequency transducers for layers 18-500 µm
- High frequency transducers for thin layers down to 5 µm
Technical Attributes
-
- Measuring Range Mils / µm
- 11.8 - 197 mil 300 - 5,000 µm
-
- Full Scale Calibration Range Mils/ µm
- -
-
- Couplant
- Application dependent, usually water
-
- Transducer Type
- Low Frequency
-
- Curvature Radius - convex
- ≥ 50.8 mm
-
- Transducer dia. with FlexCap
- Ø 14.2 mm (0.56 inches)
-
- Transducer dia. without FlexCap
- Ø 11.1 mm (0.44 inches)
-
- Curvature Radius - concave
- ≥ 152.4 mm
-
- Measuring Range
- 300 - 5000 µm
-
- Measuring Range
- 11.8 - 197 mil
-
- Minimum Curvature
- Convex surface greater than 50.8 mm radius
-
- Minimum Curvature
- Concave surface greater than 260 mm radius
-
- Temperature Measuring Range
- 0 - 40 °C
-
- Humidity Measuring Range
- 0 - 80 % RH
Technical Specifications
Thickness Measurement
Other Variations
Other ALTANA divisions
A member of
