Abrasion Kits
Article No. 5067
Accessory Kit, ASTM D4213
Abrasion Test Kit with scotch brite pad and sponge.
- Scrub resistance is evaluated by measuring weight loss of the paint film relative to a standard calibration panel
Features
- ASTM D2486 - Scrub accessory kit to evaluate the scrub resistance of wall paints using a cycles-to-failure concept
- ISO11998 - Scrub accessory kit to determine the wet-scrub resistance and cleanability of coatings via weight loss
- ASTM D3450 - Scrub accessory kit to evaluate ease of removing soil and stains from interior coating finishes with CIE Y-value
- ASTM D4213 - Scrub accessory kit to analyze abrasion resistance by measuring weight loss of the paint film relative to a standard
- ASTM D4828 - Scrub accessory kit to analyze ease of removing soil and stains from interior coating finishes with color and 60° gloss analysis
- ASTM D6736 - Scrub accessory kit to evaluate burnish resistance of latex paint to judge the change in gloss after polishing
- Accessory kits can be easily mounted on Gardner-scrub base unit (5060) - please order separately
Standards
Procedure
Sample Preparation:
- Apply test and calibration paint to black plastic panel - Gap clearance: 7 mils (180µm) and film width: 5 ¼ in. (135 mm)
- Air dry one week in horizontal position (23 ± 2°C)
- Cut panels in two halves and weigh
Procedure
- Place the two half panels side by side
- Attach in water soaked sponge and abrasive pad
- Distribute scrub medium
- Scrub until black substrate is visible on one of the two panels
- During first 200 cycles change pad direction after 50 cycles
- Record no. of scrub cycles once scrub marks are visible
- Reweigh dried panels and calculate weight loss
Delivery Content
Sponge Holder, 450 g (5072)
Sponge, polyurethane (5071)
Scotch Brite Pad, ASTM (5070)
Lilly frame (5038)
Glass plate (6980)
Sponge, polyurethane (5071)
Scotch Brite Pad, ASTM (5070)
Lilly frame (5038)
Glass plate (6980)
Accessories
Other Variations
Other ALTANA divisions
A member of
