Dry film thickness gauge with fixed and cable sensor

Article No. 3677

byko-test 9500 Premium+
Premium DFT gauge Fe/NFe Substrates with fixed and cable sensor

For measurement on ferrous and non-ferrous substrates
Continuous measurement function
Combined measurement, Fe and NFe coating in one measurement
Total Memory 2,000,000 readings, with 100 jobs
IP 65 dust and splash water protection
USB connectivity and PC software
ISO 17025 certificate included
Adjustment for ISO 19840 and SSPC Zero Offset and 2-Point accuracy verification

Select your model

Click here for the Chinese price list in RMB

excl. taxes & shipping cost

Features

The byko-test 9500 dry film thickness gauge has a modular design to accommodate a wide range of applications.

Easy to use operator menu
Temperature compensation directly in the sensor
Precise measurements even on curvatures and small parts
Easy adjustment on rough, smooth or curved substrates
61mm (2.4”) color display, resistant against scratches and chemicals (Level H6)
Stainless steel probe with dust protection membrane (IP65)
Optimal readability of flip display even in direct sunlight, brightness can be adjusted automatically or manually
Intuitive menu guidance for the gauge and software, report by 3 clicks
Freely assignable key for individual fast access
Simple and fast creation of documentation and reports
Multiple languages
Comes with two calibration foils with a thickness of 49.5 µm (1.95 mils) and 247 µm (9.72 mils)

Technical Attributes

Technical Specifications

Measuring Range Mils / µm

0 - 118 mil 0 - 3,000 µm
Full Scale Calibration Range Mils/ µm

-

Thickness Measurement

Measuring Range

0 - 3000 µm
Measuring Range

0 - 118 mil
Accuracy

Fe: 0-2000µm: ± (1 μm + 2 %)
NFe: 0-2000µm: ± (2 μm + 2 %)
Fe & NFe > 2000µm ± 3 %
Measuring area, min.

14.5 mm ø
Measuring area, min.

0.6 in ø
Minimum Curvature

Fe (NFe) convex: 4 mm (30mm) with 2-point-adjustment, zero and 250 μm on original substrate 6 mm (50 mm) with zero adjustment on original substrate
Minimum Curvature

Fe (NFe) convex: 0.16 in (1.2 in) with 2-point-adjustment, zero and 9 mils on original substrate 0.24 in (2 in) with zero adjustment on original substrate
Minimum substrate thickness

Fe (NFe) 25 μm (20 µm) with 2-point-adjustment, zero and 250 μm on original substrate 100 μm (50 µm) with zero adjustment on original substrate
Minimum substrate thickness

Fe (NFe) 1 mil (0.8 mils) with 2-point-adjustment, zero and 9 mils on original substrate 4 mils (2 mils) with zero adjustment on original substrate
Resolution

Adjustable: 0,1 µm (0,1 mils) or 0,01 µm (0,01 mils)

General

Interface

USB
Power supply

2 x AA Batteries 1.5 V Alkali, or rechargeable AA 1.2 V
Weight

0.27 kg
Operating temperature

-20 - 70 °C
Storing temperature

-20 - 70 °C
Operating temperature

-4 - 158 °F
Storing temperature

-4 - 158 °F
Dimensions: L x W x H

16 x 6.8 x 3.8 cm
Dimensions: L x W x H

6.3 x 2.7 x 1.5 in

Standards

3900-C5 5411-3 5411-11

ISO

2178 2360 2808 19840

ASTM

B499 D1186 D1400 D7091

DIN

50981 50984

Delivery Content

byko-test 9500 Premium+ w/o probe
Dual Probe 3mm for byko-test 9500, ISO 17025 (3678)
Extension Cable for 5500/9500 DFT Gauges (15077)
Fe- and NFe- Reference Plate w/2 Foils (15078)
2 Mignon batteries 1,5 V (AA) alkaline
Certificate
Operating Manual

Downloads

Product Brochure

Technical-Data-Sheet_byko-test-9500_20241126.pdf

Safety Instructions

Safety_Instructions_byko-test-9500_300003317_2310.pdf

Short Instructions

Short_Instructions_byko-test_9500_300003316_2407.pdf

Operating Manuals

Knowledge

Film thickness

For all requirements associated with a coating, there is an optimal layer thickness to ensure good flow and leveling, gloss, optimal color uniformity and opacity as well as good protection against environmental influences and corrosion. If the layer thickness is too high, mechanical-technological properties such as mandrel bending tests, stone impact tests and ball impact tests deteriorate, and the cost-effectiveness of the painting process also decreases. For this reason, layer thicknesses are worked out and specified by the paint supplier and quality assurance. These must be regularly checked and documented.

Accessories