Su región e idioma se seleccionaron automáticamente. Puede cambiar esto en cualquier momento en el menú del sitio.
Americas | English

Wet Film Thickness Gauges with wheels (microns)

Nº de art. 6553

Inmont Gage S, 50-250 µm
Wet Film Thickness Gauge with wheels - original design

  • Full Scale Calibration Range: 50 - 250 µm
  • Recommended: 70 - 230 µm
  • Resolution: 10 µm
  • Original Interchemical design for general use
  • Scale is stamped on the outside of the metal wheel; no rotating scale is used

Elige tu modelo

Click here for the Chinese price list in RMB
$432.00 €389.00 Excl. impuestos y gastos de envío

Features

Los medidores Interchemical, también llamados IC, Inmont o Rulinas, son ideales para medir capas húmedas finas: Son populares en la medición de tintas húmedas en prensas.

BYK-Gardner ofrece tres modelos básicos en varias gamas: Modelo S - uso general, Modelo R - escala giratoria, Modelo L - baja inercia con escala giratoria. Todos los modelos tienen una precisión de +/- 0,0001 in (2,5 μm) o un 2,5% de la escala completa, lo que sea mayor.

  • Muy precisos en mediciones de capas húmedas muy finas
  • Pueden usarse sobre superficies en movimiento
  • Fáciles de limpiar
  • Fabricados en acero inoxidable de gran durabilidad
  • Mango con soporte de sujeción (opcional)
  • Disponibles en sistema métrico o mils
  • Cumplen con los métodos ASTM D1212 e ISO 2808

Technical Attributes

    Thickness Measurement

  • Scale
    Metric
  • Full Scale Calibration Range
    50 - 250 µm
  • Recommended
    70 - 230 µm
  • Resolution
    10 µm
  • General

  • Weight
    0.2 kg
  • Weight
    0.5 lb
  • Dimensions
    ∅ 5 x 2.5 cm
  • Dimensions
    ∅ 2 x 1 in

Standards

ISO

2808

ASTM

D1212

Procedure

The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.
 

The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.

Subscribe to our Newsletter and stay informed! subscribe
CANCELAR