Wet Film Thickness Gauges with wheels (mils)

Article No. 6958

Inmont Gage L, 0-2 mil
Wet Film Thickness Gauge - thin coatings, rotating scale

Full Scale Calibration Range: 0 - 2 mil
Recommended: 0.4 - 1.6 mil
Resolution: 0.2 mil
For very thin coatings and accurate measurements on moving surfaces
Inside is hollowed out; very lightweight – only 0.3 lb
Black rotating scale to minimize reading errors

Select your model

Click here for the Chinese price list in RMB

excl. taxes & shipping cost

Features

The Interchemical Thickness Gage, also known as IC or Inmont gage, has long been the standard for measuring wet film thickness in the coatings industry (U.S.Patent No. 3,128,558). It is ideal for thin film applications and used for measuring wet ink film at the press.
BYK-Gardner offers three basic models in various ranges: Model S - general use, Model R - rotating scale, Model L - Low inertia with rotating scale. All models have an accuracy of +/- 0.0001 in (2.5 μm) or 2.5% full scale, whichever is greater.

Very accurate for thin film applications
Can be used with moving surfaces
Easy to clean
Stainless steel construction for long life
Metric or mils version available
Compliant with ASTM D1212 and ISO 2808 methods
Gage holder optionally

Technical Attributes

Technical Specifications

Full Scale Calibration Range Mils/ µm

- 0 - 2 mil

Thickness Measurement

Scale

English
Full Scale Calibration Range

0 - 2 mil
Recommended

0.4 - 1.6 mil
Resolution

0.1 mil

General

Weight

0.1 kg
Weight

0.3 lb
Dimensions

∅ 5 x 2.5 cm
Dimensions

∅ 2 x 1 in

Standards

ISO

2808

ASTM

D1212

Procedure

The gage consists of an eccentric inner wheel, supported by two larger outer concentric wheels. At a specific point, the inner wheel touches and picks up wet film when the gage is rolled on the coated surface. This critical clearance may be read on a rotating scale.

The gages may be held between the thumb and forefinger to take a reading, or it may be inserted into the gage holder. This holder is widely used to measure coatings safely on moving surfaces such as high-speed press rollers. It can also be used on stationary, flat, or curved surfaces since the holder makes it easier to exert a steady, even force on the gage.

Accessories