Pendulum Hardness Tester

Article No. 5866

byko-swing Persoz
Damping method for soft coatings - automatic version

Includes base unit and Persoz pendulum
Can also be used for Persoz method with optional König pendulum

Select your model

Features

Fully automated instrument for measuring pendulum hardness in accordance with the König and Persoz methods.

Automated design ensures reliable and repeatable measurement of coating hardness by reducing operator intervention
Motorized sample platform lifts the sample into the test position
Pendulum is positioned and released automatically
Automatic counter with signal when deflection is below 3° (König) or 4° (Persoz) respectively
Changeable from König to Persoz and vice versa with corresponding pendulum
Pre-assembled draft shield with easy access door
UL/CE/CSA certification
Compliant with ASTM D4366 and ISO 1522
Smallest sample size: 65mm x 75mm (2.6 x 3.0 inches)
Largest sample size: 102mm x 229mm (4.0 x 9.0 inches)
Maximum sample thickness : 8.5mm (0.33 inches)
Minimum sample thickness is limited by the rigidity of the sample.

View more videos

Technical Attributes

Technical Specifications

Weight

500 g ± 0.1
Ball Diameter

8 mm
Deflection Start/End

12° / 4°
Period of Oscillation

1 s
Damping Time on Glass

430 s ± 10 s, according to ISO

General

Power supply

100 - 240 V, 50/60 Hz, max. 1 A
Weight

18.4 kg
Weight

40.6 lb
Dimensions: L x W x H

25 x 28 x 77 cm
Dimensions: L x W x H

10 x 11 x 30.3 in

Standards

ISO

1522

ASTM

D4366

Delivery Content

Pendulum hardness tester
Protective cover
Pendulum Persoz (5857)
Glass calibration standard
Open-end wrench to adjust instrument feet
Power supply
Calibration certificate
Manual

Downloads

Manuals

Operating-Manual-byko-swing-302500060-E-2406.pdf

Safety Instructions

Safeties-Instructions-byko-swing-302500067-2010.pdf

Short Instructions

Short-Instructions-byko-swing-302500061-2406.pdf

Knowledge

Pendulum Hardness Test

The hardness and flexibility of a coating are opposing functionalities that need to be optimized to achieve the right balance for a specific application. A coating should have a high hardness on the one hand and be elastic at the same time. The pendulum test is used to evaluate elasticity by measuring the damping time of an oscillating pendulum. Measurement principle, test method including sample preparation and expected measurement precision are explained with typical examples from the practice.

Accessories