Anti-Sag Meter
Article No. 5403
Anti-Sag Meter 14-60 mils
Drawdown Bar
- Range 14 to 60 mils
- Total film width 3 3/8 inches
Certificate:
Features
The Anti-sag applicators are designed to assess paint sag in compliance with ASTM methods D3730 and D4400.
- Designed to assess paint sag in compliance with ASTM methods D3730 and D4400
- U-shaped bar design to channel the coating under the applicator blade
a series of 1/4 inch wide notches of varying clearances, spaced 1/16 inch apart
The bar is 5 inches wide and produces a total film width of 3 3/8 inches
- The applicator is made of stainless steel
Technical Attributes
-
- Sagging Gap Clearance Range
- 14 - 60 mil
-
- Gap Clearance Range
- 14 - 60 mil
-
- Gap Clearance Range
- 356 - 1524 µm
-
- Film Width
- 3.4 in
-
- Film Width
- 8.6 cm
-
- Weight
- 0.3 kg
-
- Weight
- 0.625 lb
-
- Dimensions: L x W x H
- 12.7 x 3.8 x 2.5 cm
-
- Dimensions: L x W x H
- 5 x 1.5 x 1 in
Technical Properties
General
Standards
Procedure
When a drawdown is made, a series of parallel stripes of different wet film thickness will be formed. This panel is placed on a vertical surface with the stripes horizontal and the thickest stripe lowest. As the film stripes sag downward, some of the uncoated 1/16 inch (1.6 mm) spaces may become entirely covered. The clearance of the gap that produces the thickest film stripe, not sagging completely to the stripe below, is the anti-sag index of the coating.
Accessories
Other ALTANA divisions
A member of
