Cone and Plate Viscometer
Article No. 5211
byko-visc CP H
Cone and Plate Viscometer for high temperatures
- Ideal for non-Newtonian samples
- Viscosity range: 15–1.5 Mio. cP
- Variable speed range: 5–1000 rpm
- Shear rate: 10–13,300 1/sec
- Temperature range: 50-235 °C (122–455 °F) with built-in temperature control
- Ideal for polymer melts
- On–Screen data charts & graph
- Improved data analysis, ramp of speeds & curve fitting modes
Note: Please order cones separately
Features
The byko-visc CP Cone and Plate viscometer allows for the precise determination of the absolute viscosity of materials using minimal sample sizes. With built-in temperature control and constant shear rates throughout the whole sample it can measure and predict the performance of your samples closer to the conditions in your manufacturing or application process (E.g. Spreading of paint on a wall or flowing of a polymer melt inside a pipe). The byko-visc CP combines the ability to measure low shear applications such as automotive clear coats and high shear applications such as wall paints in one instrument without a loss in accuracy. The desired viscosity ranges can be customized according to different use cases by a selection of ten (separately available) cones. The byko-visc CP Cone and Plate viscometer offers a practical solution for any QC or R&D lab requiring quick, easy and reliable testing of the behaviour of a liquid under different conditions.
- Determine the absolute viscosity of an analyte
- Small (<2 mL) sample sizes save both material and time required to clean instrument
- Precise shear rates from a robust direct drive motor design make it ideal for non-Newtonian samples
- Built in temperature control - No additional thermal systems needed
- Excellent accuracy and repeatability
- Brilliant 5" color touch display
- Test modes: Time to torque, Time to stop, QC limits
- Automatic electronic cone lift
- Bayonet coupling for easy cone attachment
- Dymo label writer output for sample labeling
- Cones made of high-quality 316 stainless steel
- CE/UL/CSA Approved
Note: Please order cones separately.
Technical Attributes
-
- Temperature Range
- 50 - 235 °C
-
- Temperature Range
- 122 - 455 °F
-
- Measuring Range
- 15 - 1.5 Mio. cP
-
- No. of Spindles
- 10 (not included)
-
- No. of Speeds
- Freely selectable
-
- Speed Range
- 5 - 1000 rpm
-
- Speeds
- variable
-
- Shear Rate
-
10-13,300 1/sec
-
- Repeatability
- 0.2%
-
- Accuracy
- ±2.0% of full scale
-
- Model Type
- High temperature
-
- Sample Volume
- 2 ml
-
- Interface
- 2x USB Type A, 1x USB Type C, 1x Ethernet
-
- Languages
- Chinese English French German Italian Japanese Spanish Portuguese
-
- Power supply
- Worldwide power supply, 24 V voltage DC input / Separate 24 V DC power supply
-
- Weight
- 6.5 kg
-
- Weight
- 14.3 lb
-
- Operating temperature
- 10 - 40 °C
-
- Storing temperature
- 0 - 60 °C
-
- Operating temperature
- 50 - 104 °F
-
- Storing temperature
- 32 - 140 °F
-
- Relative humidity
- Up to 85%, non-condensing at 35 °C (95 °F)
-
- Dimensions: L x W x H
- 30 x 17 x 43 cm
-
- Dimensions: L x W x H
- 11.5 x 6.5 x 17 in
Technical Specifications
General
Standards
Downloads
Safety Instructions
Short Instructions
Knowledge
Guide to Viscosity Measurement
Viscosity is an important property of liquids to determine how they flow, spread, or level under certain conditions. It can be defined as a liquid’s internal resistance to flow. Being able to measure the viscosity will allow to predict the behavior in a process or an application. When applying a paint by roll application the paint viscosity will strongly influence the amount of paint applied per surface area, thereby determining both yield and hiding power. It is crucial for liquid products to undergo a viscosity measurement in incoming and outgoing QC.
Read moreAccessories
Other ALTANA divisions
A member of
