Scrub abrasion and washability testers
Article No. 5061
Gardner-scrub, ASTM D2486
Abrasion Test compliant with ASTM D2486
- Base model (5060) with ASTM D2486 accessory kit
- The ASTM D2486 primarily evaluates the scrub resistance of interior wall paint.
Features
Coated and uncoated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, scouring pad, sand paper, and other means. Abrasion resistance can be tested by wet abrasion methods using scrub media or cleaning solutions. The most common applications are testing the scrub resistance of interior wall paints, floor tiles, shower stalls, and furniture surfaces. The abrasion tester can examine the washability of a coated surface for the removal of stains. Detergents and cleaning solutions can be tested and evaluated in a reproducible manner.
- Compliant with ASTM, DIN, and ISO methods with appropriate accessories
- Durable chain drive mechanism for long-term reliable operation
- Reciprocating linear motion with a constant speed over the travel distance for repeatable results
- Compact design saves on counter space
- Easy to use touch screen display
- Instrument arm holds up to 3 brush or pad holders to increase output
- User selectable scrub rate from 6 - 60 cycle/minute
- Up to 4 kg (8.8 lbs) can be applied to the instrument arm
- Stroke length 10 inch (25.4 cm), adjustable upon request to 9 or 11 inch (22.9 or 27.9 cm)
- Optional weights for custom applications
Technical Attributes
-
- Scrub Rate
- 6 -60 cycles/minute
-
- Stroke Length
-
25.4 cm, standard setting
Optional stroke length of 22.9 or 27.9 cm to be specified when ordering
-
- Stroke Length
-
10 in, standard setting
Optional stroke length of 9 in or 11 in to be specified when ordering
-
- Power supply
- 100 - 240 V, 50/60 Hz
-
- Weight
- 14.5 kg
-
- Weight
- 32 lb
-
- Dimensions: L x W x H
- 48.3 x 19.1 x 27.9 cm
-
- Dimensions: L x W x H
- 19 x 7.5 x 11 in
Technical Specifications
General
Standards
Procedure
- The paint is applied to a black plastic panel and allowed to cure
- The panel is scrubbed with a nylon bristle brush until failure occurs
- An abrasive scrub media can be used to accelerate the test
Delivery Content
Base model (5060)
Brush Holder and Mat, ASTM (5074)
Nylon brush (5011)
Lilly frame (5038)
Brass shim (6979)
Bubble level
Glass plate (6980)
byko-chart Black Scrub Panel P121-10N (5015)
Manual
Brush Holder and Mat, ASTM (5074)
Nylon brush (5011)
Lilly frame (5038)
Brass shim (6979)
Bubble level
Glass plate (6980)
byko-chart Black Scrub Panel P121-10N (5015)
Manual
Downloads
Safety Instructions
Short Instructions
Accessories
Other Variations
Other ALTANA divisions
A member of
